Grp Commands - THOMSON ST780 WL Cli Reference Manual

GRP Commands

17 GRP Commands
Introduction
This chapter describes the commands of the grp command group.
Contents
This chapter covers the following commands:
grp config
grp flush
grp rtlist
grp rip config
grp rip flush
grp rip ifconfig
grp rip show
E-DOC-CTC-20061027-0012 v2.0
Set the Generic Routing Protocol (GRP) configuration settings.
Flush the GRP interface settings and parameters.
Show the current routes in the GRP interfaces routing table.
Configure the RIP settings.
Flush the RIP interface settings and global parameters.
Configure a RIP interface.
Show the RIP settings and the routes in the RIP database.
378
379
380
381
384
385
387
377