Pptp Profadd - THOMSON ST780 WL Cli Reference Manual

PPTP Commands

pptp profadd

Define a new PPTP profile.
SYNTAX:
pptp profadd
where:
name
qos
encaps
ac
EXAMPLE:
=>pptp proflist
Profile
Relay_PPP1
=>pptp profadd name=PPTPLink encaps=vcmux ac=never
=>pptp proflist
Profile
Relay_PPP1
PPTPLink
=>
E-DOC-CTC-20061027-0012 v2.0
name = <string>
[qos = <string>]
[encaps = <{vcmux | nlpid}>]
[ac = <{never | always | keep}>]
The name of the new PPTP profile.
The name of the qosbook entry, containing the settings for this
profile.
Note This parameter never needs to be specified.
The type of WAN protocol encapsulation to be used with this PPTP
profile.
Choose between:
>
VC-MUX
>
NLPID.
The default is vcmux.
The HDLC framing option applicable to PPTP interfaces using this
PPTP profile.
Choose between:
>
always: Before relaying the encapsulated PPP frames over the
PPPoA link, make sure that the address and control field
(0xFF03) is always in front of the frames.
>
never: Before relaying the encapsulated PPP frames over the
PPPoA link, make sure the address and control field will never
be found in front of the frames.
>
keep: Do not change the frames arriving via the PPTP tunnel.
The default is never.
Note The default setting is compliant to RFC2364, therefore it is
recommended to keep this setting.
QoS Encaps AC
default nlpid always
QoS Encaps AC
default nlpid always
default vcmux never
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
617