Service Commands - THOMSON ST780 WL Cli Reference Manual

Service Commands

33 Service Commands
Introduction
This chapter describes the commands of the service command group.
Contents
This chapter covers the following commands:
service host assign
service host config
service host add
service host delete
service host disable
service host flush
service host list
service host stats
service host
triggerlist
service host rule add
service host rule
delete
service system ifadd
service system
ifdelete
service system ipadd
service system
ipdelete
service system list
service system
mapadd
service system
mapdelete
service system
modify
E-DOC-CTC-20061027-0012 v2.0
Assign a service to a host device.
Modify and/or display global service configuration options.
Add a host service.
Delete a host service.
Disable a host service.
Flush all host services.
Display a list of host services.
Show the host service statistics.
List all triggers.
Create/define a host service portmap.
Delete a host service portmap.
Add an interface group to the access list.
Delete an interface group from the access list.
Add an IP address (range) to the access list.
Delete an IP address (range) from the access list.
Display the system services.
Add a port map for a system service.
Delete a port map for a system service.
Modify a system service.
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
647
648
649
629