Dhcp Relay Iflist - THOMSON ST780 WL Cli Reference Manual

dhcp relay iflist

Show the configuration of the relay interfaces.
SYNTAX:
dhcp relay iflist
where:
intf
EXAMPLE:
=>dhcp relay iflist
eth0 :
admin state = up
max hops = 4
trusted = disabled
Internet_trigger :
admin state = up
max hops = 4
trusted = enabled
Internet :
admin state = down
max hops = 4
trusted = disabled
=>
140
[intf = <string>]
The name of the dynamic interface to be listed.
Note If not specified, all the relay interfaces will be shown.
oper state = up
remote id =
oper state = up
remote id =
oper state = down
remote id =
DHCP Commands
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0