Grp Config - THOMSON ST780 WL Cli Reference Manual

grp config

Set the Generic Routing Protocol (GRP) configuration settings.
SYNTAX:
grp config
where:
cdistance
kdistance
rdistance
trace
EXAMPLE:
=>grp config
Distance of the connected route type : 0
Distance of the kernel route type : 1
Distance of the RIP route type : 120
Tracing : disabled
=>
378
[cdistance = <number{0-255}>]
[kdistance = <number{0-255}>]
[rdistance = <number{0-255}>]
[trace = <{disabled | enabled}>]
A number between 0 and 255.
Sets the distance of the connected route type.
The default is 0.
A number between 0 and 255.
Sets the distance of the kernel route type.
The default is 1.
A number between 0 and 255.
Sets the distance of the RIP route type.
The default is 120.
Enable or disable verbose console messaging.
The default is disabled.
GRP Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0