Mbus Client Config - THOMSON ST780 WL Cli Reference Manual

mbus client config

Modify client parameters.
SYNTAX:
mbus client config
where:
writelock
wlgetimeout
wlidletimeout
path
type
RELATED COMMANDS:
mbus client exec
mbus client register
mbus debug stats
520
[writelock = <{enabled | disabled}>]
[wlgetimeout = <number>]
[wlidletimeout = <number>]
[path = <quoted string>]
[type = <idpath | keypath>]
Enable or disable mbus writelock.
The default is enabled.
Writelock get timeout in seconds.
<forever=-1, *default=nowait=0>
Writelock idle timeout in seconds.
<forever=-1, *default=nowait=30>
Fully qualified mbus path.
Path type.
The default is idpath.
Execute mbus command.
Register cli client to mbus.
Display mbus statistics.
MBUS Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0