System Commands - THOMSON ST780 WL Cli Reference Manual

System Commands

38 System Commands
Introduction
This chapter describes the commands of the system command group.
Contents
This chapter covers the following commands:
system config
system flush
system locale
system reboot
system reset
system timedreboot
system debug
autosave
system debug stats
system ra config
system rtc
synchronize
system rtc settime
E-DOC-CTC-20061027-0012 v2.0
Set/change the system configuration parameters.
Flush the current system configuration.
Set/get the regional settings.
Reboot the Thomson ST.
Reset the Thomson ST to its factory or ISP defaults and reboot the
device.
Set or change a timed reboot for the Thomson ST.
Autosave debugging commands
Show the Thomson ST CPU and memory statistics.
Configure Remote management access parameters.
Do a SNTP update and synchronize the realtime clock.
Set/get date, time, timezone, daylight savings time, uptime.
726
728
729
731
732
734
735
736
737
738
739
725