Eth Commands
eth switch qos ifconfig
Configure per port QoS parameters.
SYNTAX:
eth switch qos ifconfig
where:
Port
Mode
Fowcontrol
RELATED COMMANDS:
eth switch qos config
eth switch qos list
eth switch qos weights
E-DOC-CTC-20061027-0012 v2.0
port = <number{1-4}>
mode = <802.1p|diffserv|high|none|tos>
[flowcontrol = <disabled|enabled>]
Port to be configured
QoS Classifier for the port
Enable or disable flow control
Configure common qos parameters.
Display QoS configuration.
Configure the queue weights.
REQUIRED
REQUIRED
OPTIONAL
317