Ipqos Ef Config - THOMSON ST780 WL Cli Reference Manual

ipqos ef config

Configure the IPQoS Expedited Forwarding (EF) timer for an interface.
SYNTAX:
ipqos ef config
where:
intf
state
timeout
mtu
EXAMPLE:
The example below shows the default configuration:
=>ipqos ef list
Interface State
loop disabled
Rt_PPPoA2 disabled
eth0 disabled
=>ipqos ef config intf=Rt_PPPoA2 state=enabled
=>ipqos ef list
Interface State
loop disabled
Rt_PPPoA2 enabled
eth0 disabled
=>
RELATED COMMANDS:
ipqos ef list
ipqos ef stats
480
intf = <string>
[state = <{disabled | enabled}>]
[timeout = <number{100-10000}>]
[mtu = <number{68-65535}>]
The name of the IP interface.
Enable or disable the IPQoS EF timer for the interface.
The default is disabled.
A number between 100 and 10000 milliseconds.
Represents the timeout.
The default is 1000.
A number between 68 and 65535.
Represents the MTU of the IP interface in case of EF data.
The default is 1500.
Timeout MTU
(ms) (bytes)
1000 65535
1000 1500
1000 1500
Timeout MTU
(ms) (bytes)
1000 65535
1000 1500
1000 1500
Display the IPQoS EF timers.
Display the IPQoS EF timer statistics.
IPQoS Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0