Snmp Community Modify - THOMSON ST780 WL Cli Reference Manual

SNMP Commands

snmp community modify

Modify an SNMP community string to allow SNMP access over IP.
SYNTAX:
snmp community modify
where:
securityname
communityname
E-DOC-CTC-20061027-0012 v2.0
securityname = <{RWCommunity | ROCommunity}>
communityname = <password>
Configure access rights/restrictions control for the community
name.
Choose between:
>
RWCommunity: read/write access rights
>
ROCommunity: read only access rights.
Configure the SNMP community name.
REQUIRED
REQUIRED
707