Dyndns Modify - THOMSON ST780 WL Cli Reference Manual

dyndns modify

Modify a dynamic DNS client.
SYNTAX:
dyndns modify
where:
name
intf
user
password
group
mx
backmx
wildcard
offline
service
234
name = <string>
[intf = <string>]
[user = <string>]
[password = <password>]
[group = <string>]
[mx = <string>]
[backmx = <{disabled | enabled}>]
[wildcard = <{disabled | enabled}>]
[offline = <{disabled | enabled}>]
[service = <{dyndns | statdns | custom | No-IP |
DtDNS
[status = <{disabled | enabled}>]
[trace = <{disabled | enabled}>]
The name of the dynamic DNS client to be modified.
The dynamic DNS client interface.
Note This parameter must be defined to enable the dynamic DNS
client.
The username for dynamic DNS authentication.
The password for dynamic DNS authentication.
The dynamic DNS host group.
The mail exchanger.
Set up the mail exchanger as a backup mail exchanger (enabled) or
not (disabled).
The default is disabled.
Allow the use of hostname wildcards (enabled) or not (disabled).
The default is disabled.
Set the host to offline mode (enabled) or not (disabled).
The default is disabled.
The dynamic DNS service. Choose between:
>
dyndns
>
statdns
>
custom
>
No-IP
>
DtDNS
>
gnudip.
DynDNS Commands
| gnudip}>]
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0