Dyndns Service Modify - THOMSON ST780 WL Cli Reference Manual

dyndns service modify

Modify specific dynamic DNS service settings.
SYNTAX:
dyndns service modify
where:
name
server
port
request
updateinterval
retryinterval
max_retry
242
name = <string>
[server = <string>]
[port = <{supported TCP/UDP port name} or number>]
[request = <string>]
[updateinterval = <number{0-2097120}>]
[retryinterval = <number{0-600}]
[max_retry = <number{1-5}>]
The name of the dynamic DNS service.
Choose between:
>
dyndns
>
statdns
>
custom
>
No-IP
>
DtDNS
>
gnudip.
The hostname of the dynamic DNS server.
The port of the dynamic DNS server.
Select one of the supported TCP/UDP port names (see
TCP/UDP Port Names" on page
number.
The dynamic DNS request string.
A number between 0 and 2097120 (seconds).
Represents the time interval before a dynamic update is sent to the
dynamic DNS server.
Note The value 0 means disabled.
A number between 0 and 600 (seconds).
Represents the interval between retries if communication with the
dynamic DNS server fails.
The default is 30.
Note The value 0 means disabled.
A number between 1 and 5.
Represents the maximum number of retries if communication with
the dynamic DNS server fails.
The default is 3.
DynDNS Commands
" Supported
863) or, alternatively, specify the port
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0