Label Modify - THOMSON ST780 WL Cli Reference Manual

label modify

Modify a label configuration.
SYNTAX:
label modify
where:
name
classification
defclass
494
name = <string>
[classification = <{ignore | overwrite | increase}>]
[defclass = <number{0-15} | dscp | default>]
[ackclass = <number{0-15} | defclass | prioritize>]
[bidirectional = <{disabled | enabled}>]
[inheritance = <{disabled | enabled}>]
[tosmarking = <{disabled | enabled}>]
[tos = <number{0-255}>]
[dscp = <{DSCP name> | <number>}]
[precedence = <{IP precedence type> | <number>}]
[trace = <{disabled | enabled}>]
The name of the label to be configured.
Select the method of classification, in other words, determine
what the Layer 3 class assignment must do with the priority of
the data packet (as set by Layer 2).
Choose between:
>
ignore: Ignore the class parameters
but use the class as set by Layer 2 (VLAN user priority, ATM
QoS).
>
overwrite: Change the class to
overwriting the value set by Layer 2 (VLAN user priority,
ATM QoS).
>
increase: Change the class according to
ackclass, but only if the defclass value is higher than the
class value already set by Layer 2.
The default is ignore.
Note The class as set by Layer 2 is derived from:
>
the VLAN user priority (in case of VLAN or priority
tagged frames)
>
the ATM PVC QoS class (in case the packet is
received from an ATM PVC).
For non-VLAN frames or non-PVC received data, Layer
2 sets the internal class (priority) to
The default priority class of the assigned connection.
Choose between:
>
A number between 0 and 15
>
dscp
>
default.
The default is 0.
Label Commands
defclass and ackclass,
defclass and ackclass,
defclass and
4 by default.
E-DOC-CTC-20061027-0012 v2.0
REQUIRED
OPTIONAL
OPTIONAL