Ip Config - THOMSON ST780 WL Cli Reference Manual

ip config

Show/set global IP stack configuration options.
SYNTAX:
ip config
where:
forwarding Disable or enable the IP routing functionality.
The default is enabled.
redirects Disable or enable the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path than the
path followed is discovered.
The default is
checkoptions Disallow/Allow packets with IP options.
The default is enabled.
netbroadcasts Disable or enable net directed broadcasts.
The default is disabled.
In case netbroadcasts are allowed, no traces of netbroadcasts are
generated.
ttl A number between 0 and 255.
Represents the default Time To Live (TTL) for locally generated IP
packets. This parameter determines the number of hop counts the IP
packet may pass before it is dropped.
By limiting the TTL, continuous circulation of IP packets on the
network without ever reaching a destination is avoided.
The default is 64.
defragmode Disallow (disabled) or allow (enabled) defragmenting IP fragments.
The default is enabled.
438
[forwarding = <{disabled | enabled}>]
[redirects = <{disabled | enabled}>]
[checkoptions = <{disabled|enabled|transparent}>]
[netbroadcasts = <{disabled | enabled}>]
[ttl = <number{0-255}>]
[defragmode = <{disabled | enabled}>]
[addrcheck = <{off | own | static | dynamic}>]
[mssclamping = <{disabled | enabled}>]
[natloopback = <{disabled|enabled}>]
[loadbalancing = <{disabled|roundrobin}>]
[bitrate-window(sec) = <number{10-3600}>]
[acceleration = <{disabled|enabled}>]
enabled (for security reasons).
IP Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0