Eth Switch Qos Weights - THOMSON ST780 WL Cli Reference Manual

Eth Commands

eth switch qos weights

Configure the queue weights.
SYNTAX:
eth switch qos weights
where:
QueueX
RELATED COMMANDS:
eth switch qos config
eth switch qos ifconfig
eth switch qos list
E-DOC-CTC-20061027-0012 v2.0
queue0 = <number{0-100}>
queue1 = <number{0-100}>
queue2 = <number{0-100}>
queue3 = <number{0-100}>
The weight of queue X in WFQ (percentage)
X=1 through 4
Configure common qos parameters.
Configure per port QoS parameters.
Display QoS configuration.
REQUIRED
319