Parallel Port; Information Checklist - Xerox WorkCentrePro 123 System Administration Manual

8 Parallel Port

This chapter explains how to set up the machine in a parallel port environment. The
following information is provided.
Information Checklist – page 85
Parallel Port Environment – page 86
Parallel Port Installation – page 86
Installation Procedure – page 86
Parallel Port Communication Setup – page 86
Workstation Setup – page 87
Test Print – page 88

Information Checklist

Before starting the parallel port installation procedures, make sure that the following
items are available or have been performed.
IEEE 1284 Parallel Port Cable
Test the machine to make sure that it is installed fully and functioning
correctly.
Install the print driver.
NOTE: The installation procedures will install the machine on the parallel port of the
host workstation. The procedures are not intended to connect the host workstation to
other workstations.
If problems are encountered during the installation of the machine, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the parallel port cable to the machine until instructed
to do so.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Item By
Customer
Customer
Customer
85