Canon iR C3200 Series Service Manual page 131

13) Fit the harness guide [1], i.e., fit it in the hole in the base plate, and shift it to the right to secure; then, fit the
harness band [2].
14) Secure the shorter segment (black) of the Reader heater [1] using 2 included screws [2]. (To do so, insert a
screwdriver through the hole in the lens cover.)
15) Connect the connector [1] of the Reader heater to the connector [2] of the fuse PCB unit.
F-2-141
F-2-142
F-2-143
Chapter 2
2-55