2.7 Installing the Card Reader
2.7.1 Checking the Contents
Open the shipping box, and check to make sure none of the following is missing.
[1] Card Reader-D1................. 1 unit
[2] Pan-head screw (small)......... 1 pc.
[3] Binding screw (M4)............. 4 pc.
2.7.2 Installation Procedure
1) Remove the face cap [1] and 2 screw [2]; then, detach the upper left cover (small) [3].
2) Remove the 3 screws [1] from behind the upper left cover (small), and detach the inside cover [2]; then, attach it
as shown (by changing its orientation).
F-2-89
F-2-90
Chapter 2
0000-8498
0000-8502
2-31