2.2.11 Connecting to the
Network
Perform the following only if the model is equipped
with printer functions.
1) Turn off the control panel power switch.
2) Turn off the main power switch.
3) Connect the network cable to the machine, and turn
on the main power switch.
4) Inform the user's system administrator that the
installation work is over, and ask him/her to set up
the machine for use on the user's network.
5) When network settings have been made, turn off
the control power switch, and then turn off and then
on the main power switch.
0000-4371
Chapter 2
2-21