Removing The Transfer Cleaning Web; Removing The Oil Removing Roller; Removing The Polishing Roller - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
3. Removing the Transfer Cleaning
Web
1) Disconnect the two connectors [1]; then, while
pushing down the pressure arm [2], remove
the web assembly [3] by lifting it.
Figure 4-403B
2) Remove the E-ring [4] (resin), and remove the
cleaning blade support shaft [5].
3) Remove the web fixing bushing [6], and
remove the transfer cleaning web.
[5]
Figure 4-404B
4-54
COPYRIGHT © 2001 CANON INC.
[3]
[2]
[1]
[4] [6]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. Removing the Oil Removing Roller

1) Remove the mounting screw [2], and remove
the metal fixing [1] and the bushing [3]; then,
remove the oil removing roller [4].
[3]
[4]
Figure 4-405B

5. Removing the Polishing Roller

1) Remove the screw [1] and the metal fixing [2];
then, remove the polishing roller [3].
[1]
Figure 4-406B
[1]
[2]
[2]
[3]