Card Reader-D1
If the Card Reader-D1 is attached to the machine, you must insert a control card to operate it.
The Card Reader-D1 performs Department ID Management by using the control card.
IMPORTANT
• If you are using a login service other than the default authentication, the Limit Functions mode will not
be available.
3
• If SSO is set as the login service, you cannot use the optional Card Reader-D1.
• If SDL is set as the login service, enter your card number in the card ID field. For more information, see
the MEAP SMS Administrator Guide.
NOTE
• If the Basic Features screen does not appear on the touch panel display when the control card is
inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or cards prohibited
from use.)
• Insert a usable control card correctly.
• For instructions on turning the power ON, see "Main Power and Control Panel Power," on p. 1-16.
• If the Card Reader-C1 is attached, the types of cards shown below can be used. An optical type card
can manage up to 200 departments, and a magnetic type card can manage up to 1,000 departments.
3-32
Card Reader-D1
Magnetic Type Card
Optical Type Card