Control Card Indicator - Canon NP-1015 Service Manual

Note:
The CT unit is a discardable type. When the
color toner has been used up, toner is not
added to the CT unit; rather, the entire unit
VI. DAILY INSPECTION TO BE
PERFORMED BY THE
CUSTOMER
is replaced.
D. CONTROL CARD INDICATOR -
The control card indicator operates on
a copier with a control card unit. It flashes
in the following cases.
(1) When there is no control card in the'
control card unit.
(2) When there is a control card in the
control card unit but the indication on
the control card unit is "P" or "EE"
COPYRIGHT 0 1988 CANON INC. CANON HP-1015/1215S AN.0 OCT. 1988 PAlNTE9 IN JAt!tN IlMPRlMf AU JAPONI
I- 11
Carefully instruct the customer to be
sure to clean the following parts of the
copier once a week.
1) Primary corona unit
Push and pull the wire cleaner to clean
the corona wires.
2) Copyboard glass
Clean the copyboard glass with a damp
cloth, then wipe it dry.
3) Copyboard cover
Clean the copyboard cover with a mild
detergent solution, then wipe it dry.
4) Transfer corona
Remove the transfer corona unit from
the copier, then slide the knob (wire
cleaner) at the bottom of the transfer
corona unit back and forth to clean the
corona wires.