Siemens SINAMICS G120 Manual page 69
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Operating instructions manual (550 pages) ,
- Original instructions manual (456 pages)
Table of Contents
Advertisement
r0370[0...n]
Motor stator resistance, cold / Mot R_stator cold
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description:
Displays the motor stator resistance at an ambient temperature (p0625).
The value does not include the cable resistance.
Dependency:
Refer to: p0625
r0372[0...n]
Cable resistance / Mot R_cable
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description:
Displays the total cable resistance between power unit and motor, as well as the internal converter resistance.
Dependency:
Refer to: r0238, p0352
r0373[0...n]
Motor rated stator resistance / Mot R_stator rated
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description:
Displays the rated motor stator resistance at rated temperature (total of p0625 and p0627).
Dependency:
Refer to: p0627
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
r0374[0...n]
Motor rotor resistance cold / Mot R_r cold
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description:
Displays the motor rotor resistance at an ambient temperature p0625.
Dependency:
Refer to: p0625
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
r0376[0...n]
Rated motor rotor resistance / Mot R_rotor rated
Access level: 4
Can be changed: -
Units group: -
Min
- [ohm]
Description:
Displays the rated motor rotor resistance at rated temperature (total of p0625 and p0628).
Dependency:
Refer to: p0628
Note:
The parameter is not used for synchronous motors (p0300 = 2xx).
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Calculated: -
Scaling: -
Unit selection: -
Max
- [ohm]
Parameters
List of Parameters
Data type: FloatingPoint32
Data set: MDS
Factory setting
- [ohm]
Data type: FloatingPoint32
Data set: MDS
Factory setting
- [ohm]
Data type: FloatingPoint32
Data set: MDS
Factory setting
- [ohm]
Data type: FloatingPoint32
Data set: MDS
Factory setting
- [ohm]
Data type: FloatingPoint32
Data set: MDS
Factory setting
- [ohm]
1-69
Hide quick links:
Advertisement
Table of Contents
