Siemens SINAMICS G120 Manual page 431

p20191 RSR 0 run-time group / RSR 0 RTG
Access level: 3
Can be changed: T
Units group: -
Min
1
Description: Setting parameter for the run-time group in which instance RSR 0 of the RS flipflop is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20192 RSR 0 run sequence / RSR 0 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance RSR 0 within the run-time group set in p20191.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20193[0...1] BI: RSR 1 inputs / RSR 1 inputs
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source for set input S and reset input R of instance RSR 1 of the RS flipflop.
Index: [0] = Set S
[1] = Reset R
r20194 BO: RSR 1 output Q / RSR 1 output Q
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for output Q of instance RSR 1 of the RS flipflop
r20195 BO: RSR 1 inverted output QN / RSR 1 inv outp QN
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for inverted output QN of instance RSR 1 of the RS flipflop.
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
7999
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Parameters
List of Parameters
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
520
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Unsigned32
Data set: -
Factory setting
-
1-431