Siemens SINAMICS G120 Manual page 451

Hide thumbs Also See for SINAMICS G120:
Table of Contents

Advertisement

p20304
BI: NOT 5 input I / NOT 5 input I
Access level: 3
Can be changed: T
Units group: -
Min
-
Description:
Sets the signal source of input quantity I of instance NOT 5 of the inverter.
r20305
BO: NOT 5 inverted output / NOT 5 inv output
Access level: 3
Can be changed: -
Units group: -
Min
-
Description:
Display parameter for the inverted output of instance NOT 5 of the inverter.
p20306
NOT 5 run-time group / NOT 5 RTG
Access level: 3
Can be changed: T
Units group: -
Min
1
Description:
Setting parameter for the run-time group in which the instance NOT 5 of the inverter is to be called.
Value:
1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20307
NOT 5 run sequence / NOT 5 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description:
Setting parameter for the run sequence of instance NOT 5 within the run-time group set in p20306.
Note:
The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20308[0...3]
CI: ADD 2 inputs / ADD 2 inputs
Access level: 3
Can be changed: T
Units group: -
Min
-
Description:
Sets the signal source of input quantities X0, X1, X2, X3 of instance ADD 2 of the adder.
Index:
[0] = Input X0
[1] = Input X1
[2] = Input X2
[3] = Input X3
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Parameters
List of Parameters
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
780
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
1-451

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cu230p-2

Table of Contents