Siemens SINAMICS G120 Manual page 430

Parameters
List of Parameters
p20186 PST 1 run-time group / PST 1 RTG
Access level: 3
Can be changed: T
Units group: -
Min
5
Description: Setting parameter for the run-time group in which the instance PST 1 of the pulse extension element is to be called.
Value: 5:
6:
9999: Do not calculate
p20187 PST 1 run sequence / PST 1 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance PST 1 within the run-time group set in p20186.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20188[0...1] BI: RSR 0 inputs / RSR 0 inputs
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source for set input S and reset input R of instance RSR 0 of the RS flipflop.
Index: [0] = Set S
[1] = Reset R
r20189 BO: RSR 0 output Q / RSR 0 output Q
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for output Q of instance RSR 0 of the RS flipflop
r20190 BO: RSR 0 inverted output QN / RSR 0 inv outp QN
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Display parameter for inverted output QN of instance RSR 0 of the RS flipflop.
1-430
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
7999
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
500
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Unsigned32
Data set: -
Factory setting
-
© Siemens AG 2011 All Rights Reserved