Siemens SINAMICS G120 Manual page 345
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Operating instructions manual (550 pages) ,
- Original instructions manual (456 pages)
Table of Contents
Advertisement
r8433.0...1
BO: RTC DTC3 output / RTC DTC3 output
Access level: 3
Can be changed: -
Units group: -
Min
-
Description:
Display and binector output for the output of timer 3 (DTC3).
Where a weekday is de-activated, the following applies (p8430):
- The binector output for this timer is inactive (r8433.0 = 0).
Where a weekday is activated, the following applies (p8430):
- The ON/OFF time setting (p8431, p8432) for this timer has an instant effect on the binector output (r8433).
Bit field:
Bit
Signal name
00
Timer on
01
Timer ON negated
Dependency:
Refer to: p8409, p8430, p8431, p8432
Notice:
This parameter can only be changed when p8409 = 0.
Note:
DTC: Digital Time Clock (timer)
RTC: Real-time clock
r8570[0...39]
Macro drive object / Macro DO
Access level: 1
Can be changed: -
Units group: -
Min
-
Description:
Displays the macro file saved in the appropriate directory on the memory card/device memory.
Dependency:
Refer to: p0015
Note:
For a value = 9999999, the following applies: The read operation is still running.
r8571[0...39]
Macro Binector Input (BI) / Macro BI
Access level: 4
Can be changed: -
Units group: -
Min
-
Description:
Displays the ACX file saved in the appropriate directory in the non-volatile memory.
Dependency:
Refer to: p0700
Note:
For a value = 9999999, the following applies: The read operation is still running.
r8572[0...39]
Macro Connector Inputs (CI) for speed setpoints / Macro CI n_set
Access level: 4
Can be changed: -
Units group: -
Min
-
Description:
Displays the ACX file saved in the appropriate directory in the non-volatile memory.
Dependency:
Refer to: p1000
Note:
For a value = 9999999, the following applies: The read operation is still running.
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
No
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Parameters
List of Parameters
Data type: Unsigned16
Data set: -
Factory setting
-
0 signal
No
Yes
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Unsigned32
Data set: -
Factory setting
-
Data type: Unsigned32
Data set: -
Factory setting
-
FP
-
-
1-345
Hide quick links:
Advertisement
Table of Contents
