Siemens SINAMICS G120 Manual page 562

From extended signals
From extended signals
From extended signals
From extended signals
From speed signals
From speed signals
From torque messages, motor locked/stalled
From torque messages, motor locked/stalled
From extended signals
From extended signals
From torque messages, motor locked/stalled
From load monitoring
From load monitoring
From extended signals
1 2
Internal control/status words
Status word, monitoring functions 2
Bit No. Status word, monitoring functions 2 (r2198)
0 1 = |n_act| <= speed threshold 5
[8021.8]
[8021.8] 1 1 = |n_act| > speed threshold 5
[8021.8] 2 1 = |n_act| <= speed threshold 6
3 1 = |n_act| > speed threshold 6
[8021.8]
[8011.8] 4
1 = |n_set| < p2161
[8011.8]
5 1 = n_set > 0
[8012.8] 6 1 = Motor blocked
[8012.8] 7 1 = Motor stalled
[8020.8] 8
1 = |I_act| < I_threshold p2170
9
1 = |M_act| > torque threshold 1 and n_set reached
[8021.8]
[8012.3]
10 1 = |M_set| < torque threshold 1 (p2174)
[8013.8] 11 1 = Load monitoring signals an alarm
[8013.8] 12 1 = Load monitoring signals a fault
13
[8021.8] 1 = |M_act| > torque threshold 1
14 Reserved
15 Reserved
3 4
r2198.0
r2198.1
r2198.2
r2198.3
r2198.4
r2198.5
r2198.6
r2198.7
r2198.8
r2198.9
r2198.10
r2198.11
r2198.12
r2198.13
5 6
Function diagram
FP_2536_97_51.vsd
G120 CU230P-2
13.12.2010 V4.4
ZSW monitor 2
r2198
r2198
7 8
- 2536 -