Siemens SINAMICS G120 Manual page 447

p20273 LVM 0 run-time group / LVM 0 RTG
Access level: 3
Can be changed: T
Units group: -
Min
5
Description: Setting parameter for the run-time group in which instance LVM 0 of the double-sided limiter is to be called.
Value: 5:
6:
9999: Do not calculate
p20274 LVM 0 run sequence / LVM 0 RunSeq
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Setting parameter for the run sequence of instance LVM 0 within the run-time group set in p20273.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20275 CI: LVM 1 input X / LVM 1 input X
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source of input quantity X of instance LVM 1 of the double-sided limiter.
p20276 LVM 1 interval average value M / LVM 1 avg value M
Access level: 3
Can be changed: T
Units group: -
Min
-340.28235E36
Description: Setting parameter for the interval average M of instance LVM 1 of the double-sided limiter.
p20277 LVM 1 interval limit L / LVM 1 limit L
Access level: 3
Can be changed: T
Units group: -
Min
-340.28235E36
Description: Setting parameter for the interval limit L of instance LVM 1 of the double-sided limiter.
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
7999
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
340.28235E36
Calculated: -
Scaling: -
Unit selection: -
Max
340.28235E36
Parameters
List of Parameters
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
720
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
0.0000
Data type: FloatingPoint32
Data set: -
Factory setting
0.0000
1-447