Siemens SINAMICS G120 Manual page 298

Parameters
List of Parameters
p2223[0...n] BI: Technology controller fixed value selection bit 3 / Tec_ctrl sel bit 3
Access level: 3
Can be changed: T
Units group: -
Min
-
Description: Sets the signal source to select the fixed value of the technology controller.
Dependency: Refer to: p2220, p2221, p2222
r2224 CO: Technology controller, fixed value effective / Tec_ctr FixVal eff
Access level: 3
Can be changed: -
Units group: 9_1
Min
- [%]
Description: Displays the selected and effective fixed value of the technology controller.
Dependency: Refer to: r2229
r2225.0 CO/BO: Technology controller fixed value selection status word / Tec_ctr FixVal ZSW
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the status word for the fixed value selection of the technology controller.
Bit field: Bit Signal name
00 Technology controller fixed value selected
r2229 Technology controller number actual / Tec_ctrl No. act
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the number of the selected fixed setpoint of the technology controller.
Dependency: Refer to: r2224
1-298
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: PERCENT
Unit selection: p0595
Max
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
Calculated: -
Scaling: -
Unit selection: -
Max
-
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Data type: U32 / Binary
Data set: CDS, p0170
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
- [%]
Data type: Unsigned16
Data set: -
Factory setting
-
0 signal
No
Data type: Unsigned32
Data set: -
Factory setting
-
© Siemens AG 2011 All Rights Reserved
FP
7950,
7951