Adding Or Modifying Dual-Mode Ports - Brocade Communications Systems Brocade 8/12c User Manual

Adding or modifying dual-mode ports

You can configure an interface in a VLAN as a dual-mode port by assigning it as a tagged port to
one VLAN and as an untagged port to another VLAN. You can add a dual-mode port to any VLAN
except the default VLAN, VLAN 1.
To add a dual-mode port to a VLAN, perform the following steps.
1. Read the steps in the section
2. From the Available Ports list on the Port VLAN Configuration dialog box, select the interface
3. Select a VLAN from the Select VLANs list.
4. Click the Untag >> button to assign the port as an untagged port into the selected VLAN. The
5. Select the same interface from the Available Ports list.
6. Select another VLAN from the Select VLANs list.
7.
Brocade Network Advisor SAN User Manual
53-1002167-01
FIGURE 335 Select Classifier Groups dialog box
yourself with adding tagged and untagged ports to a VLAN.
that will be added as a dual-mode port.
Selected Ports list shows the interface listed under the VLAN to which it was assigned.
Click the Tag >> button to assign it as a tagged port to the second VLAN. The Selected Ports list
shows the port as untagged under one VLAN and tagged under another VLAN.
"Adding or modifying Port VLANs"
24
Port VLANs
on page 729 to familiarize
731