Using the Display Functions
In some cases, you may want to view more than one measured parameter at a time.
Simultaneous gain and phase measurements for example, are useful in evaluating stability in
negative feedback amplifiers. You can easily make such measurements using the dual channel
display.
1. To see channels 1 and 2 on two separate graticules, press:
. . . . . . . . . . . . . . . . . . ; ; . . . . . . . . . . . . . . . . . . . . . . . . s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . '
. . . . . . .
The analyzer shows channel 1 on the upper half of the display and channel 2 on the lower
half of the display. The analyzer also defaults to measuring S11 on channel 1 and Sfl on
channel 2.
. . . .
................................................................. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-2.
Primary Channels with a Split Display
Both
Making Measurements 2-5