[Sense<1|2>:]Frequency:mode Cw | Fixed | Sweep; [Sense<1|2>:]Frequency:offset; Sense:power Subsystem; [Sense<1|2>:]Power:achannel:spacing:channel 100 Hz To 2000 Mhz - Agilent Technologies X Series User Manual

[SENSe<1|2>:]FREQuency:MODE CW | FIXed | SWEep
This command switches between time domain (CW | FIXed) and frequency domain (SWEep).
Remote Command
Example
Remote Command Notes
Preset
Range
Backwards Compatibility SCPI
[SENSe<1|2>:]FREQuency:OFFSet
Specifies the instrument's frequency offset.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
Backwards Compatibility SCPI

SENSe:POWer Subsystem

The SENSe:POWer subsystem controls the instrument's channel and adjacent channel power
measurements.
[SENSe<1|2>:]POWer:ACHannel:SPACing:CHANnel 100 Hz to 2000 MHz
Specifies the channel spacing for the carrier signals. This command is available only for measurements
in the frequency domain (span > 0).
Remote Command
Example
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
[:SENSe]:FREQuency:MODE CW|FIXed|SWEep
[:SENSe]:FREQuency:MODE?
FREQ:MODE CW
FSE, FSP, FSU
SWEep
CW|FIXed|SWEep
:SENSe1:FREQuency:MODE
[:SENSe]:FREQuency:OFFSet
[:SENSe]:FREQuency:OFFSet?
FREQ:OFFS 10MHz
FSE, FSP, FSU
0 Hz
Saved in instrument state.
–500 GHz
500 GHz
:SENSe1:FREQuency:OFFSet
[:SENSe]:POWer:ACHannel:SPACing:CHANnel 1000
[:SENSe]:POWer:ACHannel:SPACing:CHANnel
POW:ACH:SPAC:CHAN 2000
POW:ACH:SPAC:CHAN?
Compatible SCPI Commands
Supported SCPI Commands
<freq>
141