Configure Cpu-Dos-Protect Alert-Threshold - Extreme Networks ExtremeWare Command Reference Manual

configure cpu-dos-protect alert-threshold

configure cpu-dos-protect alert-threshold <packets per second>
Description
Configures the number of packets per second that the switch needs to receive on a port for an access list
to be enabled for denial of service protection.
Syntax Description
packets per second
Default
4000 packets per second
Usage Guidelines
When heavy traffic reaches the alert threshold, a hardware ACL is created that blocks the traffic for the
timeout number of seconds.
Example
The following command configures a threshold of 3000 or more packets.
configure cpu-dos-protect alert-threshold 3000
History
This command was first available in ExtremeWare 6.2.2.
The filter-type-allowed keyword was added in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Configures the number of packets per second that the switch needs to receive on a port
for an access list to be enabled. Range is 150 to 100,000 packets per second.
configure cpu-dos-protect alert-threshold
847