Show Sflow Statistics - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

show sflow statistics

show sflow statistics
Description
Displays sFlow statistics.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables
Default
N/A
Usage Guidelines
This command displays sFlow statistics collected on all enabled ports. (No per port status is displayed.)
The following fields are displayed:
• Received frames—Number of frames received on sFlow enabled ports
• Sampled Frames—Number of frames scheduled for sending to collector(s)
• Transmitted Frames—Number of UDP packets sent to remote collector(s)
• Broadcast Frames—Number of broadcast frames received on sFlow enabled ports
• Multicast Frames—Number of multicast frames received on sFlow enabled ports
• Packet Drops—Number of samples dropped
• Zero Sampling rate—
• No Receivers—
Example
To display sFlow statistics for your system, use the following command:
show sflow statistics
The output from this command is similar to the following:
SFLOW Statistics
Received frames : 1159044921
Sampled Frames : 104944
Transmitted Frames : 10518
Broadcast Frames : 0
Multicast Frames : 1055652
806 ExtremeWare 7.5 Command Reference Guide