Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 96

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Automatic Route Selection
Mode
Telephones
System Programming
Hybrid/PBX only
All
Specify the type of table (6-digit, area code, local exchange,
or 1 + 7) and the area codes and/or exchanges to be included
in the table:
Tables ARS ARS Input
Specify that 1 + 7 tables should be searched when a leading 1
is dialed:
Tables ARS ARS 1 + 7Dial
Specify time of day when calls are routed by using Subpattern
A or B routing information:
Tables ARS Sub B Start/Stop
Identify the pools (up to six) on which calls are to be routed:
Tables ARS Sub A Pools/Sub B Pool
Assign or remove the FRL associated with each route:
Tables ARS Sub A FRL/Sub B FRL
Specify the number of digits that need to be absorbed by the
system when it routes calls on an identified route:
Tables ARS Sub A Absorb/Sub B Absorb
Specify the digits or special characters that must be added by
the system to the number dialed by a user when calls are
routed on an identified route:
Tables ARS Sub A Digit/Sub B Digit
Specify the Facility Restriction Level (FRL) and/or digits that
must be added when people dial emergency numbers in the
Special Numbers (N11) table:
More
Tables ARS
Digit
Specify the pool routing, FRL, and digits or special characters
that must be added by the system to the number dialed by a
user when calls are routed on the Dial 0 table:
More
Tables ARS
Digits
Specify whether a route is to be used for voice, data, or both
on a T1, BRI, or PRI call:
More
Tables Sub A Data/Sub B Data
SpeclNumber ARS FRL/ARS
Dial 0 ARS Pool/ARS FRL/ARS
Issue 1
June 1997
Page 64