Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 84

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Auto Dial
Mode Differences
Hybrid/PBX Mode
In Hybrid/PBX mode, the system automatically turns on the speakerphone and
selects an SA button when you press an inside or outside Auto Dial button before
lifting the handset.
Key Mode
In Key mode, the system automatically turns on the speakerphone and selects an
outside line button when you press an outside Auto Dial button without lifting the
handset. When you press an inside Auto Dial button without lifting the handset,
the system automatically turns on the speakerphone and selects an ICOM button.
Behind Switch Mode
In Behind Switch mode, the system automatically selects the prime line button
and turns on the speakerphone whenever the user presses an outside Auto Dial
button. If the Automatic Line Selection sequence has been changed to select the
ICOM button, press the prime line or outside line button before pressing an
outside Auto Dial button. Pressing an inside Auto Dial button without lifting the
handset turns on the speakerphone; the system automatically selects an ICOM
button but not an outside line.
Telephone Differences
Direct-Line Consoles
Inside Auto Dial can be programmed onto available buttons on a DLC. Use the
buttons to transfer a call, make an inside call, or determine availability of the
extension.
Queued Call Consoles
Use the Personal or System Directory instead of outside Auto Dial buttons, which
cannot be programmed on the Queued Call Console (QCC). The Extension
Directory or DSS buttons can be used instead of inside Auto Dial buttons.
Other Multiline Telephones
All multiline telephone users can program and use Auto Dial buttons. When using
an MLX-20L telephone, use Personal Directory in place of Auto Dial. On an MLX
display telephone, select the feature from the display to program it.
At an analog multiline telephone with a General Purpose Adapter (GPA)
connected to it and set for Auto operation, you must lift the handset before
pressing an Auto Dial button. Do not use the Spkrphone button.
1
1
1
1
1
1
1
1
Issue 1
June 1997
Page 52

Advertisement

Table of Contents
loading

Table of Contents