Allowed/Disallowed Lists - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Allowed/Disallowed Lists

Allowed/Disallowed Lists
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximums
Allowed Lists
Disallowed Lists
Factory Settings
Second Dial Tone Timer
Default Disallowed List
Entries
Assigned to
Description
Used in conjunction with calling restrictions (outward and toll), an Allowed List is a
Telephone users, operators, data users
Access to Allowed Lists, Access to Disallowed Lists,
Allowed Lists, Disallowed Lists, Remote Access (DISA)
Information
All
All
Establish, change, or remove Allowed/Disallowed Lists:
Tables AllowList/Disallow
Assign or remove Allowed/Disallowed Lists for individual
extensions:
Tables AllowTo/DisallowTo
Assign or remove Allowed/Disallowed Lists for non-tie
lines/trunks used for Remote Access:
LinesTrunks RemoteAccss
Allow List/DisallowLst
Assign or remove Allowed/Disallowed Lists for tie trunks used
for Remote Access:
LinesTrunks RemoteAccss
Allow List/DisallowLst
Assign or remove Allowed/Disallowed Lists for each remote
access barrier code:
LinesTrunks RemoteAccss
Allow List/DisallowLst
6 digits for each number (plus leading 1, if required)
10 numbers for each list. Release 3.1 and later systems may
also have an asterisk (*, star) preceding a leading star code.
8 lists for each system
8 lists for each extension
11 digits for each number (plus wildcard)
10 numbers for each list
8 lists for each system
8 lists for each extension
0 ms (range: 0-5,000 ms, increments of 200, entries rounded
down if not increments of 200)
Disallowed List 7
0, 10, 11, 1809, 1700, 1900, 976, 1 ppp 976, * ( p =any digit)
All VMI ports
0
0
Non-TIE Lines
TIE Lines
Barrier Code
0
Issue 1
June 1997
Page 34