Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 437

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Night Service
incoming calls on the outside line ring on extensions programmed as members of
the Night Service group associated with the operator.
Other Multiline Telephones
To make a call when Night Service with Outward Restriction is assigned on a
multiline telephone, before lifting the handset, press the Hold button and dial the
password. When you have entered the correct password, lift the handset and
make the outside call. Night Service password entry is not supported on MDC
9000 or MDW 9000 telephones.
Single-Line Telephones
Single-line telephones cannot make outside calls when Night Service with
Outward Restriction is activated.
Feature Interactions
Alarm
Authorization Code
Automatic Route
Selection
Caller ID
Calling Restrictions
Coverage
A line/trunk jack programmed as a maintenance alarm port cannot be
assigned to a Night Service group.
An authorization code can be used when Night Service is activated. For
Night Service with Outward Restriction, a user must enter a valid
password before entering an authorization code.
When Night Service with Outward Restriction is programmed, a user
must enter the password before dialing the Automatic Route Selection
(ARS) dial-out code unless either the extension is assigned to an
exclusion list or the number is on an emergency numbers list.
Caller ID information appears on the display whether or not Night Service
has been activated.
For Night Service with Outward Restriction, a Night Service Emergency
Numbers List must be created to include emergency numbers that can be
dialed from any extension without dialing the password. Any restrictions
assigned to an extension assigned to the Exclusion List are in effect when
Night Service is activated.
When the system manager enables the Coverage Control option, a
transition into Night Service operation (either by pressing the Night
Service button at an operator's console or through the Time Set feature)
automatically deactivates all programmed Coverage VMS Off buttons
(LED is off) at extensions in the Night Service group. This allows calls to
go to voice messaging system coverage at night. When the system is
taken out of Night Service—either by a press of the Night Service button
at an operator's console or through the Time Set option—the Coverage
Control option automatically activates all programmed Coverage VMS Off
buttons, turning the LED on at extensions in the Night Service group.
Outside calls no longer go to the voice messaging system.
A user at the extension can override the Night Service with Coverage
Control option by pressing the programmed Coverage VMS Off button at
any time.
2 9
2 9
2 9
Issue 1
June 1997
Page 405