Direct Station Selector: Mlx - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Direct Station Selector: MLX

Direct Station Selector: MLX
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximums
Factory Settings
Page 1 button
Page 2 button
Page 3 button
Description
One or two Direct Station Selectors (DSSs) can be connected to an MLX-20L or
MLX-28D telephone assigned as an operator position. The DSS enhances the
call-handling capabilities of an operator with a Direct-Line Console (DLC) or a
Queued Call Console (QCC). When connected to an MLX-20L telephone used as
a system programming console, the DSS facilitates system programming and
centralized telephone programming procedures. When used with the Extension
Status feature or by a calling group or Call Management System (CMS)
supervisor, the DSS allows a user to determine, at a glance, calling group or CMS
group member status or room status.
The DSS provides the following call-handling capabilities or information:
One-touch dialing of inside extensions
One-touch Transfer
One-touch Hold (DLC only)
On-hook, off-hook, or Do Not Disturb status of extensions in the system
Extension status indication (room or group member status)
Calling group queue status
Message-waiting LED status
Operator park zones
Operators
Operator Information
All
MLX-20L, MLX-28D
Assign extension numbers selected when DSS buttons are
pressed:
SysRenumber Single
16 DSSs for each system
2 DSSs for each console (1 for each console if 3 or more
consoles in one carrier)
150 extension numbers for each DSS (3 pages of extension
numbers, 50 extension numbers for each page)
Starts with Extension 0
Starts with Extension 50
Starts with Extension 100
9
9
More
DSS Button
9
Issue 1
June 1997
Page 199