Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 339

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Headset Options
A Headset Status button is a fixed feature on a QCC and cannot be deleted or
changed.
To use Headset Auto Answer, Headset/Handset Mute, or Headset Hang Up on a
telephone or console with a Headset Status button, Headset Status must be on.
When Headset Status is on, switchhook operation is disabled. The handset or
speakerphone can be used to make or answer a call, but the only way for the user
or operator to disconnect from a call is by pressing the Headset Hang Up button.
The user or operator can turn off the headset and switch back to switchhook
operation by pressing the Headset Status button; the green LED next to the
button turns off.
Headset Auto Answer
A Headset Auto Answer button allows an MLX telephone user or operator with a
headset to be connected automatically to a ringing call. Headset Status must be
on, as described in the two previous sections, before Headset Auto Answer can
be used.
When Headset Auto Answer is turned on, the green LED next to Headset Auto
Answer button is on and the user or operator hears a zip tone through the headset
to indicate an incoming call. Following the tone is a brief pause, during which the
microphone is temporarily disabled to prevent the user's or operator's private
conversation from being heard by the caller.
If a user with Headset Auto Answer on presses the button with a ringing call (for
example, when Ringing/Idle Line Preference is turned off), the call is answered
without the user hearing zip tone.
Headset Auto Answer can be turned on and off during a call without disconnecting
the caller and takes effect immediately.
Headset Auto Answer does not automatically answer voice-announced calls.
When the user or operator is on a call, Headset Auto Answer is turned off; calls
are not answered automatically until the caller hangs up or the user or operator
presses the Headset Hang Up button to disconnect the call.
When the user or operator has a call on hold or is in the process of transferring a
call or setting up a conference, Headset Auto Answer is also turned off. If the user
or operator pressed the Conf, Hold, Direct Voice Mail (to transfer to voice mail),
or Transfer button, he or she must press the Headset Auto Answer button to turn
the feature back on before another call can be answered automatically.
Two buttons are necessary for an MLX telephone user or MLX DLC operator to
use the Headset Auto Answer feature:
A Headset Hang Up button must be programmed, as described earlier.
2 3
Issue 1
June 1997
Page 307