Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 59

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Account Code Entry/Forced Account Code Entry
Mode Differences
Behind Switch Mode
In Behind Switch mode, single-line telephones must be programmed through Idle
Line Preference to select an SA or ICOM button when the user lifts the handset to
make an outgoing call.
Telephone Differences
Queued Call Consoles
To make an outgoing call from a QCC, activate Account Code Entry by selecting
the feature from the Home screen or by pressing the Feature button and selecting
the Account Code Entry feature from the display. After the account code is dialed,
complete the entry by dialing
which to make the call.
Normally, you cannot enter account codes when you answer a Group Coverage
call at a Group Cover button programmed on a multiline telephone. However,
when the QCC queue is programmed as the receiver for a coverage group, Cover
buttons are not required and the QCC system operator can enter account codes.
Those account codes appear on the SMDR printout. In this case, the Account
Code Entry feature must be activated from the display and cannot be activated by
dialing the feature code.
Other Multiline Telephones
An MLX telephone user can program account codes either individually, on outside
Auto Dial buttons, or as an entry in the Personal Directory (MLX-20L®
telephones). Enter an account code by pressing the Feature button and selecting
Account Code
On all other multiline telephones, activate Account Code Entry by pressing a
programmed Account Code Entry button or by pressing the Feature button and
dialing
82
programmed Account Code Entry button or dialing
user can also activate and complete the feature by pressing the Feature button
and selecting the feature from the display. Once the entry is complete, select a
personal line, SA, or Pool button, lift the handset, and make the call.
NOTE:
Account codes cannot be entered with System Speed Dial or Personal
Speed Dial because pressing
code entry.
#
from the display.
. After dialing the account code, complete the entry by pressing a
0
0
0
0
. Then select a personal line, SA, or Pool button on
0
to activate speed dial completes account
#
. On MLX display telephone
#
Issue 1
June 1997
Page 27