Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 376

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Integrated Administration
Screen Results
When finished using AUDIX Voice Power User or AUDIX Voice Power/Fax
Attendant User screen, press
AUDIX Voice Power or for AUDIX Voice Power/Fax Attendant. Subscriber
screens are used for programming application parameters and do not send any
information to the switch.
Access the Subscriber screens by selecting
the AUDIX Voice Power or AUDIX Voice Power/Fax Attendant menu under the
Integrated Solution III or Integrated Solution Maintenance menu. This method
allows information about an existing subscriber to be changed but does not allow
the addition of a new subscriber.
System Programming/Switch Admin
On initial installation of IS III , selecting
the AUDIX Voice Power or AUDIX Voice Power/Fax Attendant menu brings up the
System Programming/Switch Admin Form screen.
and a description of its use follows.
On subsequent access , the System Programming/Switch Admin selection brings
up the System Programming/Switch Admin Menu screen.
shows this menu as it appears with only AUDIX Voice Power installed and as it
appears with both AUDIX Voice Power and Fax Attendant installed.
Note that one of the selections on the System Programming/Switch Admin menu
(Figure 26) is System Programming/Switch Admin Form, which brings up the
System Programming/Switch Admin Form screen
The purpose of this screen is to assign switch (system) extensions to AUDIX
Voice Power and Fax Attendant services. The channel numbers represent
physical channels on the AUDIX Voice Power IVP4 or IVP6 board or the Fax
Attendant IFP2 or IFP4 board in the IS III computer.
2 5
( ). The Subscriber screen appears for
Save
Subscriber Administration
2 5
System Programming/Switch Admin
Figure 25
(Figure
Issue 1
June 1997
Page 344
from
from
shows this screen,
Figure 26 on page 349
25).