Second Dial Tone Timer - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Speed Dial
Last Number Dial
Pools
Recall/Timed Flash
Saved Number Dial
Second Dial Tone
Timer
SMDR
Transfer
Telephone numbers that are dialed by using Personal Speed Dial are
stored by Last Number Dial. However, if the stored number includes a
special character, such as Pause or Stop, the special character does not
work when the number is redialed by using Last Number Dial. Telephone
numbers that are dialed by using a System Speed Dial code are not
stored by Last Number Dial.
A pool dial-out code can be programmed on Personal Speed Dial and
System Speed Dial numbers. When a pool dial-out code is included in the
number dialed, Pause characters may immediately follow the dial-out
code to allow time to receive a local telephone company dial tone.
The Conf button is used to enter the Flash special character, which
simulates pressing the Recall button in a Personal Speed Dial or System
Speed Dial telephone number.
Telephone numbers that are dialed by using a Personal Speed Dial code
are stored by Saved Number Dial. If the number includes a special
character, such as Pause or Stop, the special characters do not work
when the number is redialed by using Last Number Dial. Telephone
numbers that are dialed by using a System Speed Dial code are not
stored by Saved Number Dial.
Marked System Speed Dial entries—entries that do not display—are not
affected by the Second Dial Tone setting. If the central office does not
immediately supply dial tone when a star code is entered and a marked
System Speed Dial entry uses star codes, then the appropriate number of
pauses (each 1.5 seconds) must be programmed in the entry following
each star code.
When Personal Speed Dial or System Speed Dial is used to dial an
outgoing call, the actual digits dialed by the system appear on the report.
However, when a marked System Speed Dial number is used, the Speed
Dial code, rather than the digits dialed, prints on the report.
Both Personal and System Speed Dial can be used to dial a transfer
destination.
Issue 1
June 1997
Page 556