Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 109

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Automatic Route Selection
SMDR
Speed Dial
System Access/
Intercom Buttons
System
Renumbering
Toll Type
SMDR reports for systems with ARS show all the digits dialed by a user in
the CALLED NUMBER field, including any absorbed (ignored) digits, and
the facility used to make the call. The reports do not include the ARS
dial-out code or any digits added by ARS.
Personal Speed Dial and System Speed Dial numbers can include the
ARS code.
The ARS FRL assigned to the extension being used to make the call
applies to calls made on both SA and Shared SA buttons.
The ARS access code can be renumbered (factory setting is 9).
In certain areas, the local telephone company requires the prefix 1 for
certain exchanges. In these cases, the exchanges can be assigned to a
1 + 7 table; the 1 + 7-Dialing Requirements must be set to Within Area
Code so that people calling numbers in other exchanges do not have to
dial .
1
Issue 1
June 1997
Page 77