Factory Settings - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
System Renumbering
Table 40.
Extensions
ARS Access Code or
Idle Line Access Code
Calling Groups
DSS Page 1 button
DSS Page 2 button
DSS Page 3 button
Extra Adjuncts
Extra Extensions
Listed Directory
Number*
MFMs
Operator (Primary
System or QCC)
Paging Groups
Park Zones
Pool
Remote Access Code
Extensions
Lines/Trunks
*
In Release 1.0 systems, when the system manager uses single renumbering to
assign a specified extension number, the system is forced idle during the
renumbering process. In Release 1.1 and later systems, the system is not forced
idle when renumbering extensions, Automatic Route Selection access code,
calling groups, Idle Line Access Code, Listed Directory Number, paging groups,
park zones, Pools, and remote access code. However, in Release 1.1 and later
systems, when you are renumbering a line/trunk, the line is forced idle during the
renumbering process.
Block Renumbering
Block renumbering can be used only when the extension numbers you are
changing from are sequential and the extension numbers you are changing to are
sequential. Block renumbering can be used to assign extension numbers to a
group of extensions, adjuncts, or lines.
Renumbering Extensions
Renumbering
Yes or No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
In Hybrid/PBX mode, an extension is assigned to the Listed Directory Number
(the published main number) for the QCC queue.

Factory Settings

9
770–791 and 7920–7929
starts with Extension 0
starts with Extension 50
starts with Extension 100
6850–6992 (2-digit plan)
6700–6842 (2-digit plan)
800
710–766 (2-digit plan)
300–499 (3-digit plan)
0
793–799
881–888 (system operator only)
Main Pool: 70
Dial-in Tie Trunk: 891
Automatic-in Tie Trunk: 892
889
10–66 (2-digit plan)
100–299 (3-digit plan)
801–880
Issue 1
June 1997
Page 591
4 0