Remote Access - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Remote Access

Remote Access
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximums
Factory Settings
ARS Facility Level for
Barrier Codes or
Lines/Trunks
Autoqueuing
Telephone users, operators, data users
Remote Access (DISA) Information, SMDR
All
Touch-tone only
Assign dedicated or shared remote access to lines/trunks:
LinesTrunks RemoteAccss
If barrier codes are not used, assign class of restrictions to
lines/trunks:
LinesTrunks RemoteAccss
Restriction/ARS Restrct/AllowList/DisallowList
Assign class of restriction for each barrier code:
LinesTrunks RemoteAccss
BarrierCode Restriction/ARS Restrct/AllowList/
DisallowList
Specify that barrier codes are required for remote access:
LinesTrunks RemoteAccss
BarrierCode
Add, change, or remove individual barrier codes, or change
length of all barrier codes:
LinesTrunks RemoteAccss
Assign barrier codes to remote access system programming
lines/trunks (nonfunctional; do not use):
LinesTrunks RemoteAccss
erCode SProgMaint
Enable or disable Callback for busy pools:
LinesTrunks RemoteAccss
Specify destination of remote access calls to unassigned
numbers:
More
Options
Change remote access code:
SysRenumber Single
16 barrier codes, with a 4- to 11-digit range (set systemwide),
using 0–9 and dialpad characters. All barrier codes are
deleted when the systemwide barrier code length is changed.
3
Disabled
3 7
3 7
LinesTrunks
Non-Tie/Tie Lines
Non-Tie/Tie Lines
BarrierCode
Barri-
AutoQueuing
Unassigned
RemoteAccs
Issue 1
June 1997
Page 522
CodeInfo