Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 422

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Multi-Function Module
Ring and one ICOM Voice button to the MFM. In Behind Switch mode, the
system automatically assigns one ICOM Ring, one ICOM Voice, and one prime
line button.
NOTE:
Do not attempt to enter extension programming from a device connected to
an MFM. Program an MFM through centralized telephone programming.
To ensure proper operation of a device connected through an MFM, the following
should be performed through centralized telephone programming:
Voice Announce to Busy should be disabled.
SA or ICOM button assignments should be changed to one SA Ring or
ICOM Ring and either one SA Originate Only or one ICOM Originate
Only button.
Ringing/Idle Line Preference should be enabled.
The Automatic Line Selection sequence should be set to the following:
— SA Ring or ICOM Ring
— SA Originate Only or ICOM Originate Only
— In Key and Behind Switch modes, outside lines that make calls from the
— In Behind Switch mode only, the prime line
When the ALS sequence is set to select an SA or ICOM button, an outside
line can be selected by dialing the Idle Line Access code (usually
and Behind Switch modes or by dialing the pool dial-out or Automatic
Route Selection code in Hybrid/PBX mode. If ALS is set to select an
outside line button before an SA or ICOM button, the device cannot be
used to make inside calls (inside calls can be received only).
Ring Timing options should be set to No Ring for each outside line on
which calls are not to be received.
When the device is used only on personal lines for supplementary
answering (such as an answering machine) or ringing (such as an external
alert) and lines/trunks are assigned to or removed from the associated
MLX telephone, the lines/trunks should also be assigned to or removed
from the MFM.
When the device is used for both inside and outside calls to supplement
ringing (external alert) or to answer or screen calls (answering machine),
calls can be redirected to the device by assigning a Primary Cover,
Secondary Cover, Group Cover, or Shared SA button. In addition, an MLX
telephone user can activate Forward and Follow Me to redirect incoming
calls to the device. However, Coverage and Forward and Follow Me should
not be used simultaneously.
MFM device
Issue 1
June 1997
Page 390
) in Key
9