Direct-Line Console - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Direct-Line Console

Direct-Line Console
At a Glance
Users Affected
Reports Affected
Modes
Telephones
MLX
Analog Multiline
System Programming
Maximums
Operator positions (total
DLCs and QCCs)
DLCs for each module
MLX Display Labels
Factory Settings
Personal Lines
MLX DLC
Analog DLC
DLC Operator Automatic
Hold
Operator Hold Timer
One-Touch Transfer with
Automatic Completion
Primary System Operator
Position
Park Zone Extensions
DLC operators only
System Information (
Extension Information
All
MLX-20L, MLX-28D®
BIS-22D, BIS-34, BIS-34D, MERLIN II System Display
Console
Assign or remove an individual DLC position:
Operator Positions
Enable or disable DLC operator automatic Hold systemwide:
Operator DLC Hold
When one-touch Transfer is programmed, select either
automatic or manual completion for system operators:
Options Transfer
Change the duration of the timer signaling a call still on hold:
Operator Hold Timer
8
2
See ''Display'' on page
Lines 1–18
Lines 1–32
Disabled
60 sec (range 10–255 sec)
Enabled
First (lowest) jack on first MLX or analog extension module,
fixed
881–888
9
9
), Operator Information,
SysSet-up
Direct Line
One Touch Transfer
225.
Issue 1
June 1997
Page 191