Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 354

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
HotLine
A HotLine telephone cannot be connected to an MFM (Multi-Function Module) or
GPA (General Purpose Adapter).
Telephone Differences
Only single-line telephones or tip/ring devices can be HotLine extensions.
Feature Interactions
Account Code Entry
Allowed/
Disallowed Lists
Automatic Route
Selection
Barge-In
Callback
Call Waiting
Camp-On
Conference
Calling Restrictions
Coverage
Extension Status
Forward and
Follow Me
Forward and
Follow Me
continued
Group Calling
Hold
Last Number Dial
HotLine extensions cannot use Account Code Entry.
Allowed and Disallowed Lists can be assigned to HotLine extensions.
HotLine extensions can use the ARS access code if it is programmed into
their Personal Speed Dial number.
HotLine calls can be barged into.
Callback is not intended for HotLine extensions. However, Automatic
Callback may be used, if programmed, for inside and ARS (Hybrid/PBX
mode only) calls. Selective Callback is also available.
Call Waiting can be activated for a HotLine extension, but the telephone
cannot put the current call on hold and pick up a waiting call. Instead, the
user must hang up the current call and wait for the call-waiting call to ring.
HotLine calls can be camped onto but a HotLine extension cannot camp
on to calls.
Conference is not available at HotLine extensions.
Calling restrictions can be programmed for HotLine extensions.
Coverage features are not recommended for HotLine extensions.
Extension Status is not recommended for HotLine extensions because
HotLine extension cannot dial the # codes to change the Extension
Status.
Forward and Follow Me are not intended for HotLine extensions but can
be used at these extensions. Forwarding must be programmed at the
extension before it is assigned as a HotLine extension. Follow Me cannot
be activated at a HotLine extension, and both Forward and Follow Me
must be cancelled at non-HotLine extensions.
Remote Call Forwarding is not intended for HotLine extensions but can
be programmed before the extension is assigned as a HotLine. HotLine
administration must be removed if the station is to cancel Remote Call
Forwarding.
A HotLine extension can dial a calling group extension number.
Hold is not available at HotLine extensions.
Last Number Dial is not available at HotLine extensions.
2 3
2 3
Issue 1
June 1997
Page 322